![Town & Country Fireplaces TCWS38D User Manual Download Page 7](http://html.mh-extra.com/html/town-and-country-fireplaces/tcws38d/tcws38d_user-manual_1141154007.webp)
Fireplace Description
The Proflame 2 Remote Control Fireplace consists of three elements:
1.
Proflame 2 Remote Control Transmitter.
2.
Proflame Integrated Fireplace Control (IFC Module) board and a wiring harness to connect the
IFC to the gas valve and stepper motor.
3.
Wall mounted Remote Control Receiver (Figure 3).
Transmitter (Remote Control with LCD Display)
The Proflame 2 Transmitter uses a streamline design with a simple key layout and an informative LCD
display (Figure 2). The remote control transmitter is powered by 3 AAA batteries. A mode key is provided
to index between the features and a thermostat key is used to turn on/off or index through thermostat
functions (Figure 1).
IFC Module
The Proflame 2 Integrated Fireplace Control (IFC) module is a device that allows automatic ignition and pilot
flame supervision and commands the functions of the fireplace. It’s configured to control the ON/OFF main
burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI (continuous pilot ignition)
modes. The Proflame 2 IFC module controls and connects directly to the pilot assembly and the automatic
valve using low electric power.
The IFC module can be powered by both an AC power supply, or a back up battery pack for back up. The
Proflame 2 offers the added ability to control the comfort fan speed from OFF through six (6) speeds, and a
remotely actuated auxiliary outlet and a dimmable light outlet. The external batteries can provide DC power to
the IFC allowing the batteries to be used only when line power is interrupted or lost, and if the fireplace does
not use a combustion fan.
Battery power is for temporary short term use.
Operating Procedure
The fireplace must first be linked to the wall switch. Then the wall switch must be linked to the remote hand-
set. Instructions for both of these procedures including instructions for enabling a Blue Tooth
®
enabled apple
mobile device to the fireplace, see “Linking Remote Handset and apple® Device to Fireplace” on page 11.
7
5056.42524D2
TCWS38D.ver2_150815-16