Thermostatic Mode
(Only for use where permitted)
(Operates the fi replace within a set tem-
perature range)
The fi replace is shipped with thermostatic
mode function deactivated. If this function is
permitted for use in your area it can be acti-
vated by depressing the recessed button on
the
back of the hand held remote
. (Fig. #115)
Once activated the thermostat symbol (Fig.
#116) will be displayed when the thermostat
button is pressed
To activate a set point temperature:
1.
Press the thermostat button to activate
the thermostat mode. The temperature
and thermostat symbols will appear.
2.
Press and hold the thermostat button
on the lower right hand side of the hand
held remote for 5 seconds. (Fig. #117)
The temperature icon on the display will
fl ash. (Fig. #118)
3.
While the temperature icon is fl ashing
use the up and down arrows to set the
temperature to the desired setting.
4.
Once the desired setting is reached,
press the OK button. If the OK button
is not pressed the icon will continue to
fl ash for 5 seconds and then set itself to
the temperature displayed.
5.
The fi replace is now in thermostatic mode.
To exit the thermostatic mode press the
program, manual or timer buttons. Please
note that the fi rst press of the manual
button will turn the fi replace off.
THERMOSTATIC MODE
BUTTON
Fig. #116
THERMOSTAT SYMBOL
THERMOSTATIC BUTTON
Fig. #115
Fig. #117
TEMPERATURE SETTING
Fig. #118
56
TCWS.54CSTE 080713-68
Summary of Contents for TCWS.54CSTE
Page 66: ...66 TCWS 54CSTE 080713 68 ...
Page 67: ...67 TCWS 54CSTE 080713 68 ...
