TCWS.38NG08C 250512-16
12.
Check all connections for leaks
WARNING: The access
panel including gasket
must be reinstalled after
conversion/ installation
or servicing has been
completed. Failure to
do so will overheat and
cause premature failure
of the control system.
10.
Remove the aluminum cap from the top
of the pressure regulator.
(Fig.
#27)
11.
Press down on the center post and rotate
90°. The center post should stay down.
(Fig. #28). Replace the aluminum cap.
13.
Fill in the date and the name of the person who performed the conversion in the white
area on the conversion label. Peel off the protective backing and apply the conversion
label directly over the gas specifi cations on the rating label.
14. Re-attach the access panel with gasket to the side of the fi rebox with the screws previ-
ously removed. (Fig. #30)
15. If the burner was removed in previous steps, replace in reverse order or return to instal-
lation process on Pg. 3.
ADD DATE
ADD NAME
Fig #27
Fig #28
NG
LP
Fig #30
Fig #29
9
