A Firebox Panel Set must be installed for safe operation. Do not use the fireplace without
panels. Unpack and inspect all panels. The panels need to be installed before the logs are
in place.
Caution: The Firebox Panels are very fragile, and should be handled with care.
1. Remove the Side Panel Retainers located on the underside of the firebox heat shield.
The retainers are each held in place by one screw.
2. Install the Left and Right Front Floor Panels.
3. Install the Left and Right Rear Floor Panels.
4. Install the Left Side Panel by inserting the bottom of the panel in first and then angling
it up into position. It may be necessary to push the firebox shield up to allow panel to
move freely into place.
5. Install the Right Side Panel.
6. Reinstall Panel Retainers.
(See Porcelain panel instruction manual for specific instructions for these panels) Before
proceeding see burner instructions.
TC36 SEE-THRU PANELS
BEIGE HERRINGBONE ...........................................................................TCPN.757241.C
TUSCAN ....................................................................................................TCPN.757151.C
HERITAGE RED BRICK ................................................................................. TCPN.759.C
BLACK PORCELAIN ............................................................................... TCPN.757253.C
COFFEE BEAN BROWN PORCELAIN .............................................. TCPN.757253CB.C
RIGHT FLOOR PANEL
(HERRINGBONE PANEL SET SHOWN)
LEFT SIDE PANEL
REAR LEFT FLOOR PANEL
REAR RIGHT FLOOR PANEL
LEFT FLOOR PANEL
RIGHT SIDE PANEL
26
TC36_CSTE 051109-44
Firebox Panels Installation
Fig. #45
Summary of Contents for TC36ST
Page 41: ...41 TC36_CSTE 051109 44 Notes ...
Page 42: ...42 TC36_CSTE 051109 44 Notes ...
Page 43: ...43 TC36_CSTE 051109 44 Notes ...
