Tower Hobbies T22011, Safety And Instruction Manual

Page: 8 / 20

8
•
DO NOT plug the iron
into a power outlet whilst
other appliances are
plugged in, as this could
cause the electrics to
overload.
•
The plug and cord should
not be allowed to touch
the hot soleplate of the
iron. Let the iron cool
down completely before
storing it. DO NOT wind
the power cord around the
iron.
•
Always disconnect the
iron from the mains outlet
when filling it with water or
when emptying the water
tank after use.
•
DO NOT use an extension
cable for the iron. Make
sure the iron’s power
cord is arranged in a way
it cannot be pulled or
tripped over.
•
When placing the iron on
its stand, ensure that the
surface is stable.
•
DO NOT use the iron if
it has been dropped, if
there are visible signs of
damage or if it is leaking.
SAFETY PROTECTIVE CUT-
OUT
•
In the unlikely event of
the thermostat failing,
the protection cut-out will
operate to prevent the
iron overheating. The iron
should then be taken to
the nearest authorised
service facility or the
manufacturer.
•
NOTE: Some parts of the
iron have been slightly
greased and as a result,
the iron may smoke
slightly when switched
on for the first time. This
should not occur after the
first few uses.
•
In the unlikely event the
appliance develops a fault,
stop using it immediately
and seek advice from the
Customer Support Team:
+44 (0) 333 220 6066