Tower Hobbies T22011, Safety And Instruction Manual

Page: 14 / 20

14
Limescale:
If you live in a particularly hard water area, we recommend using bottled or distilled
water.
WARNING: Never pour vinegar or other liquid cleaners for eliminating calcium into
water tank
.
After ironing:
1. Disconnect the power supply and empty any water left in the water tank.
2. Reconnect the power supply and disconnect after the indicator light goes off,
this dries the soleplate.
CAUTION: Let the iron completely cool down.
3. Once the iron has cooled wipe flakes and any other deposits on the soleplate
with a damp cloth or a nonabrasive (liquid) cleaner.
4. Clean the upper part of iron with a damp cloth. Always store the emptied iron
horizontally on a stable surface with a cloth protecting the soleplate.
5. When not in use, store the appliance in a safe, dry place, out of reach of
children.
Anti-calc:
The anti-calc function is a permanent system located inside the water tank to
eliminate impurities from the water and to reduce the problems connected with
limescale build-up.
To prolong the efficiency of this system, follow these steps occasionally:
1. Unplug the iron and allow it to cool down.
2. Locate the water cup that accompanied the iron. Fill it with water 3/4 full. Add
1 teaspoon of salt to water and fill the water tank with this solution.
3. Leave the solution in the water tank for 15 minutes, shaking occasionally, and
then empty it.
IMPORTANT!
Do not use the appliance if the surface is wet or damp. Ensure the appliance is
completely clean and dry before use and storage.
8 - Cleaning & Care
WARNING:
Do not immerse any electrical part of the appliance in water
such as motor units or plugs.
Please see cleaning section for further instructions.