Safety and Instruction Manual
9
Helpline: +44 (0) 333 220 6066
Using The Steam Jet:
This function provides an extra amount of steam
to remove stubborn creases.
1. Turn the temperature control to the position
“MAX”.
2. The indicator light turns off when the
required temperature is reached.
3. Press the steam jet button once.
4. Wait a few seconds before pressing the
steam jet button again.
5. When there are stubborn creases usually
all creases can be removed within three
operations of the steam jet.
Ironing Tips:
•
Always check first whether a label with
ironing instructions is attached to the article.
•
The iron heats up quicker than it cools
down, therefore, you should start ironing
the articles requiring the lowest temperature
such as those made of synthetic fibres.
•
If the fabric consists of various kinds of
fibres, you must always select the lowest
ironing temperature to iron the composition
of those fibres.
•
Silk and other fabrics that are likely to
become shiny should be ironed on the inner
side.
•
Velvet and other textures that rapidly
become shiny should be ironed in one
direction with light pressure applied. Always
keep the iron moving at any given moment.
•
Pure woollen fabrics (100% wool) may be
ironed with the iron set a steam position.
Preferably set steam button to the
maximum position and use a dry cloth as a
mat.
Note: when ironing woollen fabrics, shining of
the fabric may occur. So it is suggested that you
should turn the article inside out and iron the
reverse side.
Garment Care:
Read all garment labels when ironing and ensure
the manufacturers ironing guidelines are followed.
The manufacturers ironing guidelines are often
shown by symbols similar to the below:
Caution: Please note that
on the label means
that this article may not ironed.
Instructions
on Label
Type of
Fabric
Thermostat Dial
Nylon
Silk
Wool
Cotton
Linen
Note:
if the article to be ironed consists of
various different fabrics, always select the
temperature required by the most delicate fabric.
MAX
MIN