10
Register online at www.towerhousewares.co.uk for your
FREE
extended guarantee.
4 TROUBLE SHOOTING & FAQS
Problem
Possible Reasons
Solution
Not enough heat or too
much heat
The temperature dial may not have
been rotated correctly, or it may have
been set to the incorrect position. The
iron is unplugged.
Set the temperature dial to the
correct position and check if the
iron is plugged in.
No steam or leakage.
The temperature dial has been set to
MIN
Set the temperature dial to the
required position.
No burst of steam or no
vertical steam
The vertical steam function has been
used too often within in a short period.
The iron is not hot enough.
Continue ironing in horizontal posi-
tion and wait a while before using
the vertical steam function again.
Leaking water from
Soleplate
The temperature dial is not set in steam
range.
Set the temperature dial as per
steam range.
The heat is still not enough.
Open Steam Button only after the
indicator light goes off.
The water is over than max position
Pour out the remaining water
Little Steam
Check if the Steam Button is in proper
location.
Set the steam button to the proper
location.
Steam hole is blocked.
Clean the steam hole with distilled
water.
There is too little water in the water
tank
Fill the tank with water
No Spraying
There is not enough pressure or air
inside
Press the spray nozzle by hand,
and push the spray button several
times continuously.