Safety and Instruction Manual
7
Helpline: +44 (0) 333 220 6066
• Always fully unwind any cord to
avoid overheating.
• WARNING!
Ensure adequate
ventilation; keep an open space
of approximately 20 cm all
around the appliance.
• WARNING!
Do not use the
appliance near flammable
materials such as curtains, or
other combustible material.
• The appliance is fitted with a
safety thermal cut-out device
and will shut off in the event of
overload. If this occurs, switch
the appliance off and it will
automatically reset when cool.
• Never use your fingers or an
object (e.g. a spatula) to push
ingredients down the feeding
tube while the appliance is
running. Only use the pusher for
this purpose.
• Caution:
Be very careful when
you handle the discs, blender
blade unit or food processor
blade unit. Be especially careful
when you remove them from
the food processor bowl or
blender jar, when you empty the
bowl or jar and when you clean
them. These are extremely
sharp and may cause injury
if handled incorrectly. Always
store blades and cutting discs
in their respective covers or
processing containers.
• Do not exert too much pressure
on the pusher when you press
ingredients down the feeding
tube.
• Unplug from power outlet
before putting on or taking
off attachments, and before
cleaning.
• Do not put hot liquids into the
food processor bowl. Warm
liquids only.
• Avoid contacting moving parts
at all times.
• Place the processor bowl &
blender bowl onto the base of
the processor before fitting any
attachments.
• All blades and attachments
should be removed with care
before cleaning.
• Do not over fill the processor.
Do not fill the bowl beyond the
MAX indication.
• Always remove the blade before
emptying.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the service
department:
+44 (0) 333 220 6066
