Safety and Instruction Manual
11
Helpline: +44 (0) 333 220 6066
4 TROUBLE SHOOTING & FAQ’S
The food is unevenly
processed
Make sure your ingredients are cut into even, ½ - 1 inch pieces before
processing.
Do not overload the processor. Process in batches to allow all ingredients
to process evenly.
My food processor
moves around the
countertop too much
during use.
The Food Processor is fitted with heavy duty suction feet. Check that they
are clean and dry.
This can happen with heavier loads as the motor is required to work
harder, ensure the maximum load capacity is not exceeded.
The motor does not
start.
There is a built in safety lock to prevent the motor from starting if the food
processor is not properly assembled. Make sure the food processor bowl
or blender jar with blade unit is correctly assembled.
Some food is left
on the disc after
processing.
Leftover food on the disc is a normal occurrence. Remove the food,
carefully from the disc and chop by hand.
Food falls over in the
feed tube.
When standing food in the feed tube, make sure you pack it fully for best
results. This will stop food from tilting.
