9
Automatic Switch Off - Air Fryer Drawer Safety Switch:
•
When using the air fryer, please ensure that the basket is inside of the drawer, the
drawer is fully closed and that the cooking timer has been set.
Removing The Frying Basket:
•
The pan and frying basket can both be fully removed from the air fryer.
•
Pull on the handle to slide the pan and frying basket out.
•
Push the cover for the handle release button forward. There will be a small button on
the top of the handle.
•
Push it down and lift upwards to remove the frying basket from the pan.
Preparing For Use:
1. Place the appliance on a stable, horizontal and even surface. Do not place the appliance
on a non-heat-resistant surface.
2. Place the basket in the pan.
3. Pull the cord from the storage compartment, which is located on the bottom of the
appliance.
4. Do not fill the pan with oil or any other liquid.
5. Do not put anything on top of the appliance, as it will disrupt the airflow and affect your
cooking results.
Using The Control Panel (see specification page):
1. Plug the power cord into a suitable power socket. Insert the basket into the pan. All of the
indicators will display for 1 second (the food pre-set back-light will also illuminate) and will
then turn off. The start key will remain visible.
2. Press the START button (
key 3
) for 2 seconds (a sound will indicate this has been pressed).
The panel will then illuminate. When it is in default mode the Temp/Timer (key 7/8)
displays will blink and “15:00” will display as the default time. The temperature indicator
light will turn on.
3. Press Temperature/Timer
(key 2)
to toggle the display.
4. When the “MIN” light is illuminated the panel is in timer mode.
5. When the ”°C” light is illuminated the panel is in Temperature mode.
6. When the Time indicator illuminates, the Menu indicator (
key 1
) will turn off.
7. Touch the Plus ‘+’ (
key 7
) or Minus ‘-‘ (
key 8
) buttons until your desired cooking time is set.
The display will increase or decrease by 1 minute with each press. If you press down and
hold the Increase/Decrease indicators (
key 7/8
) you can quickly adjust the settings.
Note:
There will be no accompanying sound for this operation.
8. Set the range to between 00:00-60:00.The display will cease blinking after the timer is set.
5 - Using Your Appliance