Safety and Instruction Manual
7
Helpline: +44 (0) 333 220 6066
• To reduce the risk of injury, never
place cutter-assembly blades on base
without blender jug properly attached.
• Never exceed the maximum capacity.
• Do not attempt to bypass the interlock
system that powers the unit on.
• Always operate on a flat surface.
• Unplug the blender when not in use,
before taking off or putting on parts
and before cleaning.
• Warning: Do not use if the blending
cup is cracked or broken. Do not
operate the Blender when the
blending cup is empty.
• If the blade assembly blades are
loose, discontinue use immediately
and replace the blade assembly. Do
not attempt to repair or tighten blade
assembly.
• Inspect container and cutter
assembly daily. Do not use broken,
chipped or cracked container. Check
blade assembly for wear, nicks, or
broken blades. Do not use broken or
cracked blades.
• To prevent damage to blender,
container, or blade assembly.
• DO NOT move or shake blender while
in operation.
• When removing the jug from the
blender base you must wait until
the blades have stopped spinning.
Removing the jug whilst the blades
are spinning can cause damage to
the blender.
• In the unlikely event the appliance
develops a fault, stop using it
immediately and seek advice from the
service department:
+44 (0) 333 220 6066