background image

MANUAL

OCTOBER 2022 A1

Towelrads.com Ltd,  Queensgate House, Cookham Road, Bracknell, Berkshire RG12 1RB

Telephone: 01628 625 367 | Fax: 01628 659 520 | www.Towelrads.com

SMART THERMOSTATIC

ELECTRONIC CONTROL FOR TOWEL RADIATORS

 

SMART Thermostatic 

is an electronic thermostat for the automatic control 

of electric towel radiators. Using internal sensor, it is capable of keeping the
temperature of the towel radiator to a desired value. Ten different electric 
resistances are available in a range between 100W and 1000W.

Operative modes:

 Comfort, Stand-by/Antifreeze, Boost 2h, P1, P2.

•  Comfort mode:

 The thermostat keeps the towel radiators temperature 

at the level set by the user.

 

•  Boost 2h mode: 

the heating element is activated for a period of 2 

hours independently of the configured temperature. The temperature is 
automatically control LED so as not to exceed 65°C. At the end of the 2 
hour period, the device returns to “

Comfort

” mode.

 

•  P1 and P2 mode: 

The control system enters “Boost” mode for 2 

hours; after that it returns into “

Comfort

” mode for 22 or 10 hours 

(configurable by the user P1 or P2) and then it enters again into “

Boost

” 

mode for 2 hours, repeating the same procedure endlessly. 

•  Standby/Antifreeze mode:

 if the temperature drops below 10°C the 

device will automatically active the control system in order the internal 
liquid freezing

Available colours:

White

Chrome

Black

Anthracite

SMART Thermostatic

 is compliant with the following standards:

•  Eco-design Directive for Energy-using Products, 2005/32/EC (<0,5W).
•  EN 60335-1:2012+A11:2014 -EN 60335-2-30:2009+A11:2012
•  EN 60335-2-43:2003+A1:2006+A2:2008
•  EN 61000-3-2:2014 -EN61000-3-3:2013 -EN 62233:2008
•  EN 55014-1:2006+A1:2009+A2:2011 -EN 55014-2:1997+A1:2001+A2:2008

SMART Thermostatic is a certified product:

Summary of Contents for SMART Thermostatic










Reviews: