Remove any aftermarket accessories (saddle bags, back
rests, etc) before hitch installation. After installation remount
accessories. NOTE: Some aftermarket accessories may
not be compatible with InstaTrike.
1) Place motorcycle on a smooth level surface on its side stand.
2) Remove saddle bags.
3) Mount bracket
C
(
left side
) to the 2 bolts that attach the rear fender and sub
frame to the main motorcycle frame. Place enclosed spacers between bracket
and sub frame.
new bolts provided Remount saddle bags at this time if
applicable.
4) Mount bracket
D
(
right side
) to the 2 bolts that attach the rear fender and sub
frame to the main motorcycle frame. Place enclosed spacers between bracket
and sub frame.
new bolts provided Remount saddle bags at this time if
applicable.
5) Attach bracket
G
(left) and bracket
H
(right) to the bottom of the rear rider’s
peg attachment bracket on motorcycle. Use new bolt provided. Place bolt
through attachment bracket, rear riders peg, and finally brackets G and H.
NOTE: Be certain rider’s pegs are in the down position before tightening
bolt. Tighten bolt so that it compresses peg attachment bracket and holds
brackets A and B firmly. Rear FootPegs will no longer be mobile after
bracket attachment.
7) Attach top of bracket
A
to outside of bracket
C
8) Attach top of bracket
B
to outside of bracket
D
9) Attach bottom of brackets
A
and
B
to rear of hitch
10) Attach bracket
E (left side)
to outside of tab on bracket
G
and to top of hitch
arm.
11) Attach bracket
F (right side)
to outside of tab on bracket
H
and to top of hitch
arm.
