2. Place ¾ inch riser under motorcycle rear wheel.
3. Assemble axles, wheels, and fenders onto the tow-pac hitch cart.
4. Push the hitch mount into the receiver hitch. (this might be a
little difficult until you get use to doing it. Removing the paint
from the hitch mount and applying a little grease will help.)
5. Place the hitch pin through the receiver hitch and hitch mount
(
alignment plate
). Install and tighten the tension bolt.
6. Align InstaTrike wheels.
(initial installation only. Check periodically and
realign if necessary)
7. Bolt leanstop braces to hitch. (Bolt inserts from the bottom) Be
certain to replace washers/spacers in the same configuration as
when you removed them.
8. Remove leveling jack stands.
9. Check all bolts for tightness.
10. You are now ready for the test ride.
A. Keep your feet up!
B. Ride slowly in first gear until you are comfortable with the
Tow-Pac system.
Leanstop Braces
When installing InstaTrike, bolt leanstop brace to receiver hitch by
inserting bolt from
bottom
through the leanstop brace and
washers/spacers. Thread bolt into bracket on hitch and tighten.
