TOVIS P/N
MTG-1960XT
DATE
2002.03.11
REV NO.
0
TOVIS
Color Monitor Service Manual
PAGE
16/30
D.COLOR ADJUSTMENT.
1) Before you adjust the “COLOR”, you have to set the “CONTRAST” and
“BRIGHTNESS” to maximum. (TOVIS’s reference condition )
2) At the factory mode, search “COLOR” using the “UP/DOWN” key.
3) Select “COLOR” by pressing the “SEL” key then the color sub-menu comes
out figure to the left below.
4) Search a color temperature which you want to adjust (gain or bias)
using the “UP/DOWN” key.
( “GAIN” means high-beam area’s adjustment and “BIAS” means
low-beam area’s adjustment.)
5) Select any item by pressing the “SEL” key then the OSD
changes to under sub-menu as below right figure.
6) Adjust color temperature using “UP/DOWN” and “SEL” key.
( “UP/DOWN” key: moves item position, “SEL” key : change value.)
7) At the “GAIN” mode, “CO” means sub-contrast adjustment.
Sub-contrast adjusted using the “UP/DOWN” key if necessary.
(To meet the white peak “ft” level.)
8) Press the “MODE” key to finish the “GAIN” or “BIAS” adjustment.
9) If you want to adjust other “GAIN” or “BIAS”,
Repeat from item 4 to 8.
10) Press the “MODE” key again to finish the “COLOR” adjustment.
11) If you want to finish factory adjustment, Select “RECALL”
as item “B. Exit and save”
TOVIS CO., LTD.
