manualshive.com logo in svg

Tovis MTG-1960XT, Service Manual

Share
Download
Tovis MTG-1960XT Service Manual Download Page 14

 

TOVIS P/N 

MTG-1960XT 

DATE 

2002.03.11 

REV NO. 

0 

TOVIS 

 

Color Monitor Service Manual 

PAGE 

14/30 

 
4) Search any language by using the “UP/DOWN” key. 
5) Select a language by pressing the “SEL” key. 
6) Press the “MODE” key to finish and save the selected language. 

Then you will return to the Main-Menu in your selected language. 

 

7)

 Press the “MODE” key again to finish the adjustment. The OSD will   

 disappear. 
 
 

  LANGUAGE 
  ENGLISH 
    FRANCAIS 
  ESPANOL 
  PORTUGUES 

 
 
- Factory control. 
This monitor has two-adjustment modes. 
One is for user’s own adjusting and other is for the factory adjustment. 
Sometimes it will need to revert back to the factory adjustment mode for repair. 

After the factory adjustment you can readjust to your adjustments. (refer to item 
6-3)  
 
 
A. Factory mode entering. 

Press the “MODE” and “DOWN” keys simultaneously until the OSD displays like 
below. 

The OSD of factory mode is the same format with user mode except for the 

color of the bottom line. (User mode is blue; factory mode is red as below) 
 
 
 
 
 
 
 
 
 
 

TOVIS CO., LTD. 

 

 

Summary of Contents for MTG-1960XT































Reviews:

No comments

Brands by name

Popular brands

Load more brands