Tournesol Siteworks Wilshire Screen Assembly Instructions Download Page 1

Page: 1 / 4

Tournesol Siteworks, LLC

Successful sites start here

2930 Faber Street, Union City, CA 94587

ph: 800.542.2282 f: 510.471.6243

www.tournesolsiteworks.com

48-00382-00, Rev. C

Wilshire Screen Assembly Instructions

This instruction is a guide to installing the Wilshire Screen onto a Wilshire
planter.

Tools Required:

3/16” hex driver, 7/16” socket or box wrench or ratchet-drive socket, and
silicone sealant.

PARTS/HARDWARE LIST

Main Bracket(s)

2pcs. per

¼-20 SST Flathead Screw

4pcs. per

(2 ½” x ~70” metal uprights, black)

¼” SST Lock Washer

4pcs. per

VTGX Panel(s)

1 or 2 pcs. per

¼-20 SST Hex Nut

4pcs. per

(48” x 48” or 72” x 48” wire panel)

¼-20 SST Hex Screw

4pcs. per

Wilshire Rectangle

1pc. per

¼ SST Flat Washer

4pcs. per

(48”, 72”, or 96” long FRP or GFRC planter)

Summary of Contents for Wilshire Screen

Page 1: ...e Screen onto a Wilshire planter Tools Required 3 16 hex driver 7 16 socket or box wrench or ratchet drive socket and silicone sealant PARTS HARDWARE LIST Main Bracket s 2pcs per 20 SST Flathead Screw...

Page 2: ...VTG panel and the countersink on the upright should face the outside With the holes aligned insert the flathead screw from the outside of the upright and through the bracket on the panel Place a lock...

Page 3: ...and place the short ends of the posts into the slots at the ends of the planter on the top lip Some maneuvering may be required as there may be slight interference between the posts and the pocket in...

Page 4: ...four screw positions 2 per pocket post Using your tools secure the hex screws in place Although the hardware is stainless steel added protection can be provided by covering the hardware with the same...