6
TDS-G200VLDB
9.
ALWAYS USE A WHEEL DRESSER TO
RESURFACE THE FACE OF THE GRINDING
WHEEL.
10.
DRESS THE GRINDING WHEEL OFTEN.
This will keep the wheel surface flat and free of
nicks and residue/glaze.
11.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from grinder
before turning it on.
12.
ALLOW THE GRINDER TO ATTAIN FULL
SPEED BEFORE BEGINNING WORK.
13.
NEVER STOP THE GRINDER BY FORCING
MATERIAL INTO THE WHEEL.
Let the grinder
stop rotating on its own.
14.
SECURE THE BENCH GRINDER
to a stand
or workbench to prevent sliding or tipping during
use. See page 12.
15.
FREQUENTLY
clean grinding dust from inside
of the guards and beneath the grinder.
16.
NEVER GRIND SMALL STOCK
without it being
properly supported on the tool rests,and held
by pliers or clamps.
17.
DO NOT FORCE THE TOOL
to perform an
operation for which it was not designed. It will
do a safer and higher quality job by only performing
operations for which the tool was intended.
SAFETY GUIDELINES
EXTENSION CORDS
Keep the extension cord clear of the working
area. Position the cord so that it will not get
caught on lumber, tools or other obstructions
while you are working with a power tool.
Check extension cords before each use. If
damaged replace immediately. Never use a tool
with a damaged cord, since touching the
damaged area could cause electrical shock,
resulting in serious injury.t
WARNING
!
WARNING
!
Use a proper extension cord. Only use cords
listed by Underwriters Laboratories (UL). Other
extension cords can cause a drop in line voltage,
resulting in a loss of power and overheating of tool.
When operating a power tool outdoors, use an
outdoor extension cord marked “W-A” or “W ”.
These cords are rated for outdoor use and reduce
the risk of electric shock.
