2 of 4
•
When the door is opened, the infrared photo transistor no longer receives a reflected light, and the service light is turned
on.
Service Light Assembly with Mounting Bracket (viewed from underside)
The service light control board is equipped with a manual override push button switch which, when engaged, enables the
service light to remain on at all times.
Kit Contents
The TouchTunes service light kit ships in a single box. If any component appears to be damaged, do not attempt to use or
install the system. Notify TouchTunes or your local distributor immediately.
Verify that you have received the following components with kit 600099-001:
Installation
Required tools/estimated time:
Installation of the service light kit requires the use of only a Phillips-head screwdriver, and
can be accomplished in less than ten minutes.
Note:
This procedure is applicable to the
Ovation II
jukebox only (p/n 700225-xxx); the casting of the Ovation I is not
machined to accommodate mounting a service light assembly.
1. Unlock and open the front door of the Ovation II.
2. Locate the 2 mounting holes for the service light assembly on the upper rear wall of the casting.
Qty. Description
P/N
1
Service light board assembly
300405-002
1
Installation notes (this document)
900395-001
2
8-32 3/8-inch machine screws
N/A
LED
Infrared photo transistor
Manual override switch
High intensity
LEDs
