16
Installation
2. Using a screwdriver, loosen the screws for the wire-strain relief bracket to adjust the bracket.
3. Adjust the wire-strain relief bracket so you can bring cables into the jukebox through the
cable channel opening.
4. Tighten the screws for the wire-strain relief bracket to keep open the cable channel opening.
Once the cable channel is open and the wire-strain relief bracket is loose, you are ready to
connect the jukebox to the lighting console.
5. Locate the Ovation’s control board.
The control board is usually mounted on or near the rear of the Ovation’s touchscreen.
6. Locate the RJ45 cable for the DMX connection.
7. Connect the RJ45 end of the cable to the
DMX Out
connector on the Ovation’s control board.
Wire strain relief bracket