Touchstone 87026, Owner'S Manual

Page: 17 / 24

Lumenex Series Electric Fireplace
www.touchstonehomeproducts.com 800.215.1990
17
Operating Fireplace
Once the fireplace has been plugged into a grounded outlet, the fireplace is now ready for operation. Ensure that
the house circuit breakers for the power supply are turned on.
Power
Plug the power cable into a 110v 15 amp grounded outlet. Make sure the outlet is in good condition and that the
plug is not loose.
NEVER exceed the maximum amperage for the circuit. DO NOT plug other appliances into the
same circuit.
Methods of Operation
This electric fireplace can be operated by the TOUCH PANEL, located in the TOP RIGHT vent opening in the
front of the fireplace, or by the battery-powered REMOTE CONTROL. The operation and functions of the two
methods are the same.
Remote Control Operation
•
This remote control uses one CR2025 battery (included)
•
Instructions for battery installation are located in the remote control battery compartment.
•
To improve operation of the remote control, aim the remote control at the front of the fireplace. DO NOT
PRESS the buttons too quickly. Give the unit time to respond to each command.
•
NOTICE: NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion . Dispose of batteries at your local hazardous material processing center.