10
3.4.2 Pressure measurement
How to get into the pressure measurement:
Short press the button and get into the feature menu
➞
tap“pressure measurement” icon
➞
start to
measure the pressure.
Tips: Please kindly wear the watch a little bit tight and make your body keep balance.
3.4.2. Heart rate monitor
The smart watch can monitor your heart rate 24 hours or measure it manually.
(1) To set up 24 hours monitor:
1)Steps:TouchElex App
➞
“Device” page
➞
Tap “Heart rate monitoring”
➞
Enable 24 hours HR
monitor.
2)The heart rate monitor interval time can be set in the app by 5 minutes, 10 minutes, 20
minutes or 30 minutes.
3)Enable the “Heart rate reminder” and set up the maximum and minimum heart rates you want which
can alert you when your heart rate is higher or lower by the numbers you setup.
(2) To measure heart rate manually on the smart watch:
Steps: Slide up within the Home screen page to go to the features list
➞
tap the “ Heart rate” icon
➞
Heart rate is measuring
(3) Principle of heart rate monitor:
Blood will have strong absorption of green light. When the heartbeat occurs, blood will flow through the
part where the green light is located, and the blood will absorb the green light, leading to the weakening
of the reflected green light. In this way, the intensity of the green light measured by the light sensor will be
weakened, and a heartbeat can be detected.
(4) Tips:
Please kindly wear the watch one or two fingers distance from your wrist to ensure measure or monitor
heart rate more accurately.
