Product specification subject to change without prior notice.
Page 5/41
Adapter/Converter Advisory
Should specific adapter/converter is required, i.e. tablet PCs, in order to connect to this monitor, please use
original adapter/converter recommended by the original brand. The length of cables should not be longer
than 2 meters each.
2
Connecting the Monitor
The procedures for setting up your Monitor kit is as followed:
Power & Signal Connections
2.1
Power cord connection:
Connect the power cord to the AC outlet.
2.2
Power on:
Switch on the main power of your monitor (switch is located next to the AC outlet)
2.3
Input Source VGA (HDMI1/ HDMI2/ UHD HDMI3/DVI/DP) Signal cable connection:
Plug one end of the 15-pin signal cable to the video signal connector at the rear of the
PC/laptop system (or engine box) and the other end to the monitor. Or plug one end of the HDMI
signal cable to signal source (PC, laptop, IPC, media player of any kind with proper HDMI or
other out port), and the other end to the HDMI connector on the monitor.
Tighten the connector screws on both ends of the cable to secure good signal connection.
2.4
USB cable connection (for touch monitor models):
Plug one end of the USB (B type) cable to the USB (A type) connector at the rear of the (PC,
or, IPC, or, media player), and the other end to the USB connector on monitor.
Please connect the signal source first, then follow by connecting USB cable for touch.
