Touch T214B, Owner'S Manual

Page: 9 / 24

9
PART 2. BREWING A CUP
Ready to Brew Your First Cup
1. Make sure the brewer is powered ON. Place a cup or mug on the Drip Tray.
2. Pull on the Latch to open the Cover. (Fig. 7) Insert a desired Pod into the Red Cup Holder. (Fig. 8)
NOTE: DO NOT remove the foil lid or puncture the Pod. (Fig. 8) When using a smaller cup, the Drip Tray may be inserted into the Upper Slot to minimize
splattering of coffee. (Fig. 7)
CAUTION: There are three sharp Needles that puncture the Pod: a top Needle underneath the Cover and two bottom Needles in the Red Cup Holder. To
avoid risk of injury, do not put your fingers in the Red Cup Holder. (Fig. 8)
3. Close the Cover by pressing down on the Cover Handle. (Fig. 9)
4. Press on the desired cup button. T314B / T414S ONLY: The default taste is BOLD. You may select a different taste preference by pressing on the MILD
or MED Button. (Fig. 9)
NOTE: If you do not push a cup size button to start brewing within 60 seconds, the brewer will be disabled to prevent accidental activation. Re-activate the
Brewer by pulling on the Latch and Closing the Cover again.
Fig. 7 Fig. 8 Fig. 9
T214B T314B / T414S