LV32P3 / LV52P3
2.1. Setting up DIP Switches
The DIP switches control output formats. The switches are set for EDID compatible
displays by default. Consult your dealer to find out whether or not your display is
EDID compatible.
Figure 2.1 LV52P3/LV32P3
Disabling VGA Output
To disable VGA output through the card, turn switch 3 to zero. Set up all LV52P3’s or
LV32P3’s the same way.
Figure 2.2 VGA Output Disabled
Enabling VGA Output on EDID compatible displays
To enable VGA Output on an EDID compatible display, turn switches 1 and 3 to zero
as shown in Figure. 3.3, and the card detects display information through EDID and
selects method of displaying VGA output automatically.
Note
: Some EDID compatible displays do not support this setting. Contact your dealer
and find out about this in advance.
Figure 2.3 VGA Output Disabled on EDID Compatible Displays
TOTOKU
6
