LV32P3 / LV52P3
TOTOKU
5
2. Installation
This chapter explains how to install LV52P3 or LV32P3. Refer to the computer
instruction manual as necessary.
Make sure to follow the procedures as indicated below to successfully install the
graphics card and its software.
1
）
Set up the DIP switches
2
）
Install the card
3
）
Connect the display(s)
4
）
Turn on the computer
5
）
Install driver software
6
）
Set up the display properties
7
）
Restart the computer
Before installing …
If you do not know how to install, ask your dealer to install it.
Do not touch connectors, IC/LSI pins, and/or terminals on the card. Static
electricity could damage them.
Handle the card with clean hands. Grease on your hands could cause the product
to slip off.
Keep any parts that become unnecessary for future use.
Make sure that connectors, connector pins, and contacts are not damaged,
deformed, or stained. Dust off before use. They could cause short circuits and fire.
Handle the connectors carefully to prevent damage from dropping and keep them
clean.
Be careful not to drop any fasteners inside the computer. It could cause a short
circuit and/or an open circuit.
Do not expose the cables to heat; do not put heavy objects on the cables. They
could damage the cables and cause fire. To disconnect a cable, undo the screws on
the connector and pull straight by holding the connector.
Use this product only on supported UL-listed computers.
