14
15
Basic Operations
Preparation
Using the Product for the First Time
2. Open the shutoff valve
1
Fully open the shutoff valve.
Shutoff
valve
[For shutoff valve
(Concealed power connection type)]
Shutoff
valve
Note
●
If the tank is empty it will take some minutes until
water is discharged from the nozzle.
1. Turn on the power
1
Insert the power plug.
Switch the breaker on the
distribution board to ON.
(Electrical box type, Concealed power
connection type)
The wand extends and then retracts.
2
Check that the POWER LED
on the main display is lit up.
Lit
Stopping
[STOP]
Drying
[DRYER]
Cleansing
[REAR]
[OSCILLATING]
When you press this button
again during use, the wand
moves back and forth to
wash your rear thoroughly.
[SOFT REAR]
Washes your rear with mild water
pressure.
[FRONT]
Serves as a bidet for ladies.
Temperature adjustment button
(Page 18)
• Adjust temperatures
[PRESSURE]
You can adjust the water pressure as
desired to 5 different levels.
●
The PRESSURE LEDs lights up
when you sit on the toilet seat.
[POSITION]
You can adjust the washing position as desired to
5 different points.
●
The washing position returns to the standard
position (3rd point) when you stand up from the
toilet seat.
Note
• Sitting back on the toilet seat makes it easier to adjust the wand position and to reduce splashing.
●
Functions that
operate when a button
is pressed during
"REAR", "SOFT REAR"
or "FRONT" cleansing.
Indication
LED
Cleanses your rear.
Dries your rear.
For your information
●
Water may sometimes come out from around the wand while water is warmed up or when it expands in the warm water tank.
●
As warm water tank is used as hot water system, the temperature of warm water may become lower if it is continuously consumed.
Introduction
Operation
