16
17
Press a button on the remote control; a beep sounds when the main unit receives the signal.
Stopping
Cleansing
Drying
Personal Setting
[STOP]
Stops the operation.
[REAR]
Cleanses your rear.
*The mode changes between [SOFT] (Flickering) and
[REAR] (Lit) each time the button is pressed.
[SOFT]
Washes your rear with mild water pressure.
[DRYER]
Dries your rear.
[FRONT]
Serves as a bidet for ladies.
[USER1] / [USER2]
You can store your preferred wand position, water pressure and water temperature a setting.
●
To store a setting
While cleansing is in progress, set your preferred wand position, water pressure, and warm water
temperature, and then press and hold [USER 1] or [USER 2] for 2 seconds or longer.
●
To use
Press [USER 1] or [USER 2], and then press the button for the cleansing you want to use.
*The wand position and water pressure lamps will light up for about 10 seconds in their set
positions, and the water temperature display switches.
●
Functions that operate when a button is pressed during "REAR", "SOFT" or "FRONT" cleansing.
[OSCILLATING]
●
The wand moves back and forth to
wash your rear thoroughly.
●
The setting changes between "ON" and
"OFF" each time the button is pressed.
[POSITION]
●
The wand position can be adjusted to
the front or rear.
("
▲
": Moves to the front, "
▼
": Moves to
the rear)
[PULSATING]
●
Washes with the water pressure
pulsating between soft and strong.
●
The setting changes between "ON" and
"OFF" each time the button is pressed.
[PRESSURE]
●
The water pressure strength can be
adjusted for cleansing functions such
as REAR.("-": Softer, "+": Stronger)
●
Sitting back on the toilet seat makes it easier to adjust the
wand position and to reduce splashing.
Note
Basic Operations
For your information
●
Water may sometimes come out from around the wand while water
is warmed up or when it expands in the warm water tank.
●
As warm water tank is used as hot water system, the temperature
of warm water may become lower if it is continuously consumed.
Operation
