25
24
T
roubleshooting
Preventing Damage Due to Frozen Water Pipes
When There is a Risk of Frozen Water Pipes
Please keep the bathroom interior warm when the outdoor temperature is expected to be below
freezing. When that is not possible, please remove the water from the system.
When there is a risk of freezing conditions, please prevent it by taking the following steps.
If the product freezes, the unit could be damaged, resulting in leaks.
1
➀
Press on the Washlet main unit operation
panel.(Drain the residual water from inside of
the product.)
➁
Remove the water filter with drain valve.
➀
Turn off the water supply by turning off the water
shut off valve and the junction valve.
• Turn off the junction valve with a flathead
screwdriver.
• Be sure to unplug the power cord before removing
the Washlet main unit from the toilet.
➁
Turn the toilet tank lever and remove the water from
the tank.
➂
Drain the water, which should be about 1 fl. oz.
(30ml) , from inside of the supply hose by keeping
the hose in a horizontal position.
➃
Press again.
(Put the nozzle back in place.)
Removing water from
the toilet tank.
Drain the water from
the pipes.
Water Removal
Supply hose
➀
Make sure that the “POWER” light on the
Washlet main unit operation panel is lit and
set the WATER and SEAT temperatures to
“HIGH”, respectively.
➁
Close the lid.
Keep the inside of
Washlet warm.
1
When freezing temperatures are anticipated.
Please do not use the power saving features. The product could be damaged by freezing.
See page 15 about stopping the Time Energy Saver.
See page 16 about stopping the Auto Energy Saver.
3
When leaving a site for the winter...
When using at a cabin or other location...
Please remove the water! There can be severe cold spells during wintertime absences.
Please be sure to remove the water in order to avoid freezing.
2
Please keep the toilet tank lever turned until the tank has completely emptied.
2
• Do not remove the water filter
with drain valve when the
water shut off valve and the
junction valve are opened.
• Otherwise, water will gush out.
Prohibited
Caution
➄
Reinstall the water filter with drain valve.
Water filter with
drain valve
Turn clockwise.
Tighten the water filter with
drain valve securely.
• Failure to tighten it securely
could result in leaks.
Mandatory
Caution
When Not Using the Washlet Over an Extended Period of Time
When not using the Washlet for extended periods, changes in the water could cause skin inflammation.
There is also a chance that the product could freeze, so please remove the water.
Removing water from the toilet tank.
See Page 24
Drain the water from the pipes.
See Page 24
Pull the power supply plug from the wall outlet.
• Place the detached Washlet main unit on the
front side of top of the toilet bowl.
Remove the Washlet
main unit.
Removing the Water
3
D08248-2 09.1.9 2:04 PM ページ 24
