066742
2003.5
TN74-2X
INSTALLATION AND INSTRUCTION MANUAL
OPTIONAL BRACKET FOR AUTOMATIC FAUCET
Please follow this Installation and instruction manual to make the best performance.
Note to installer
Please give this manual to the customer after installation.
Caution
Be sure to close the stop valve before cleaning the strainer.
Ignoring this may cause property damage.
In case the wall is thin, use blockboard thicker than 12mm.
In case the wall is tiling or concrete, use wall anchors.(not included)
Tighten the Optional bracket with tapping screws.(tapping screw
φ
4.5
×
38)
Components
Parts supplied
Qty.
Part name
Installation and
instruction
manual
Optional
bracket
Tapping
screw
Warning
Please select
adequate Flexible
tube according to
the site.
Stop valve
Flexible tube(resin tube)
Other optional parts
Flexible tube(copper tube)
TEL7*Atype
TEL7*Btype
Water supply
connection
Applicable
items
Specifications
Before installation
●
This is Installation and instruction manual for Optional
bracket
（
TN74-2X
）
used for Automatic Faucet
(Single Faucet).
●
In case the controller of Automatic Faucet can not
be installed or can not be in the correct direction due
to the interference of piping or wiring ,use this bracket.
●
Also, this bracket is applicable when you exchange an
old Automatic Faucet(TEL1, TEL1B, TEL2, TEL2B)
with new one.
●
Please refer to the Installation manual of Automatic
Faucet except for installation of this Optional bracket.
Applicable area for installing
controller of Automatic Faucet
Applicable area
Controller
Warning
