4
ENGLISH
INSTALLATION PROCEDURE
Faucet
1. Place gaskets under spout.
Pass the supply hoses and mounting
studs through the mountin holes until the
spout comes to rest.
2. Orient the spout as needed. From
below the mounting surface, place the
crescent shaped washer over the mount-
ing studs as shown.
Fasten the mounting nuts to the studs to
secure the spout.
Tighten with wrench as needed.
Connect the hoses to the supply lines.
The left hose (marked with red band)
connects to the hot water supply. The
right hose connects to the cold water
supply.
Tighten with wrench as needed.
Spout Body
Gasket
3. Insert the drain lift rod through the open-
ing in the back of spout.
Mounting Studs
Washer
Spring Washer
Mounting Nut
Supply Hoses
Drain
Lift Rod
Summary of Contents for TLS01301U
Page 23: ...23...
