Water discharge port
2
Cap nut
1
Packing
Cap of discharged
water port
Check of flow rate and discharged water temperature
Checking for water leakage
4. Setting of temperature control handle
"40"
After finished mounting the product, check the following points.
Is the cap nut loose?
1
2
A
B
C
Case when water leaks from
A and C
Case when water leaks from
B
7
-2
.
8.
Checking items
Check for looseness
Ref.
7
-1.
2.Clean the filter and cap
of the water discharge port.
Anchoring of the
water faucet body
Ref.
4
í
6
-2.
Safety
button
Safety button
Temperature control handle
Upper (Shower side)
(Open/Close)
changeover handle
Cold water
Hot water
Cap
Small screw
Temperature control
handle
Precision
screwdriver
Temperature control
handle
Filter
Perform this procedure if the water discharge temperature is not the same as the indication.
*Be sure to hand the instruction manual and other accessories included in the package over to the customer.
1. Turn the (open/close) changeover
handle up to the upper limit.
Water comes out from the shower.
2. Turn the temperature control
handle to the position where
hot water of appropriate
temperature (about 40 °C)
comes out regardless of the
number on the scale.
Since the temperature control handle locks
just above "40" on the scale, turn the
handle while the safety button is pressed if
you want to let a hot water of the
temperature higher than this come out.
3. Remove the temperature
control handle.
While paying attention so that the
temperature control handle does not
turn, remove the cap and small
screw and pull out the handle.
5. After anchoring, check to
see whether hot water of
appropriated temperature
(about 40 °C) comes out.
4. Mount the temperature
control handle.
Set it to the number "40" on the scale
and insert the temperature control
handle, anchor it with the small screw
and mount the cap.
After confirming that the
packing is mounted, retighten
the cap nut one more time.
After making sure that the pipe
is not corroded or cracked,
wrap the sealing tape around
the pipe again and remount it.
Check if water leaks.
Check to see if the water faucet body
is loose.
If water flows slowly or the temperature
cannot be controlled properly, check
the following points.
Are the water discharge port and
filter clogged with dust and dirt?
2
