4
ENGLISH
INSTALLATION PROCEDURE
Valves
1.Remove Collars from Valves (Hot and Cold) and Diverter Assembly.
Connect Valves and Diverter assembly using connecting tubes (SOLD
SEPARATELY, see detail in Table 1) with provided Gasket (Blue) as shown.
Tighen nuts on connecting tubes until slightly loose (need adjustability for
later installation)
Collar
Collar
Gasket (Foam)
Gasket (Foam)
Gasket (Rubber)
Washer (Metal)
Mounting Nut
Gasket (BLUE)
Connecting Tube
Hand Shower Port
TBN02203 and
TBN02204 Only
O-rings
C-Clip
Nut
Gasket (BLUE)
Collar
Gasket (Foam)
Gasket (Rubber)
Washer (Metal)
Mounting Nut
Deck Thickness
Max 1-3/4” (45)
Deck Thickness
Max 1-3/4” (45)
Required Hole
ø1-1/4”~1-7-16”
(ø 33~37)
Required Hole
ø1-1/4”~1-7-16”
(ø 33~37)
Required Hole
ø1-1/4”~1-7-16”
(ø 33~37)
Required Hole
ø1-1/4”~1-7-16”
(ø 33~37)
Required Hole
ø1-1/4”~1-7-16”
(ø 33~37)
Required Hole
ø1-1/4”~1-7-16”
(ø 33~37)
Required Hole
ø1-1/4”~1-7-16”
(ø 33~37)
Hand shower
mount hole
Hole Preparation
For 4 Hole Roman Tub Filler / TBN02203 and TBN02204
Hole Preparation
For 3 Hole Roman Tub Filler / TBN02201 and TBN02202
3-3/4”~6-1/8”
(95~155)
3-3/4”~6-1/8”
(95~155)
3-3/4”~6-1/8”
(95~155)
3-3/4”~6-1/8”
(95~155)
Plug Cover
Gasket (Rubber)
Washer (Metal)
Mounting Nut
Unit: inch(mm)
