background image

 

When the toilet seat does not get warm, or when the warm water is not warm enough, even after 

temperature adjustment.

 

­

Is the energy saver set to "ON"? (Page 22)

Three diff erent temperature levels (High / Medium / Low) and "OFF" setting can be made.

*1 To prevent condensation, the water temperature does not drop below 20 C even when set to "OFF".

Displaying the temperature level of the pressed button

Warm water temperature 
(When you want to adjust the warm water temperature)

Drying air temperature 
(When you want to adjust the drying air temperature)

Toilet seat 
temperature 
(When you 
want to adjust 
the toilet seat 
temperature)

Adjusting the temperature

1

Choose and press the button of the temperature that you want to set from 

the 

 ("Toilet seat temperature"button), 

 ("Warm water 

temperature" button) and 

 ("Dryer temperature" button).

 

The current temperature level appears.

2

Press the button selected in step 

1

 repeatedly until a desired 

temperature level lights up.

The setting changes each time the button is pressed once

"High"

Lit

"Medium"

Lit

"Low"

Lit

"OFF"

OFF

 

The "Drying" cannot be turned "OFF".

If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off , but the 
setting will be retained.
If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 1.

<Settings complete>

When seat temperature 
is set

Lit

<Seat>

20

Temperature Adjustment

Toilet Seat, Warm Water, Drying

M08049-1_EN.indd   20

M08049-1_EN.indd   20

10/5/2017   1:09:33 PM

10/5/2017   1:09:33 PM

Summary of Contents for SW3036

















































Reviews: