1
(For your safety please follow the instructions below)
Important Safeguards
ENGLISH
Warning
Do not disassemble or modify the item in any way not described in this manual
If the system is broken, property damage, scalding and other injuries are likely to occur.
Do Not
Do not use hot water supply that is higher than 185°F (85°C). Do not use steam
as hot water supply.
If water is hotter than 185°F is used. If it is broken, property damage, scalding, and other
injuries may occur.
Read the “Important Safeguards” section thoroughly before installing the product.
Warning
●The following symbols indicate safe and proper use of the
product. Failure to observe them may result in injury or
property damage.
●The following table demonstrates the use
of safety symbols in this manual.
Failure to observe this symbol may result in serious injury.
Do not use the product at temperature exceeding what local codes allow.
If parts are damaged, property damage, scalding and other injuries may occur.
Water Supply
Pressure
20 psi (0.15MPa)(flowing pressure)
125 psi (0.75MPa)(static)
Less than 185˚F (85˚C)
:
To prevent being scalded
due to wrong operation, it is recommended the hot supply
water temperature is 140°F (60°C).
Water that meet National/Primary drinking water
regulation
34 - 104˚F (2
～
40˚C)
1/2” NPT
Supplied Water Temperature
Water Quality
Ambient Temperature
Water Supply Connection
Check local building
code
Depending on the model, some specifications may differ.
Specification & Before Installation
▪ Observe all local plumbing codes.
▪ Make sure water supply is shut off.
▪ Read these instructions carefully to ensure proper installation.
▪ Check to make sure you have the following parts indicated below.
▪ Recommended pressure is about 30-45 psi (0.2-0.3 MPa)
▪
If the water supply pressure is higher than 125psi (0.86MPa), you should buy a reducing
valve to reduce the pressure to the range of 0.2-0.3MPa (0.2-0.3MPa).
Minimum pressure
Maximum pressure
