5
6.Mount the tank to the controller.
3.Remove pump unit from the tank.
Liquid soap
MAX fill line
Tank
Pump unit
4.Slowly pour liquid soap into the tank.
NOTE: Fill the tank up to MAX fill line.
NOTE: Use only TOTO approved soap viscosity
7.Close the cover.
补充皂液
REFILLING THE SOAP
Tank
2.将皂液箱移出。
1.Open the cover.
1.打开罩盖。
罩盖
Cover
皂液箱
2.Remove the tank from the controller.
3.将泵移出。
泵
4.将皂液缓缓倒入皂液箱。
皂液箱
最大填充线
皂液
注意：请不要超出最大填充线。
注意：请使用TOTO指定粘度的皂液。
5.将泵向下插入皂液箱直至其卡到位。
罩盖
Cover
6.将皂液箱装入机能部。
Tank
皂液箱
机能部
Controller
7.合上罩盖。
5.Replace the pump by pushing it down firmly
over the tank opening until it snaps in place.
Pump unit
Bottom of Pump
泵
泵底端
注意：补充皂液时，请清洁皂液箱。
NOTE: Clean container before refilling.
8.Purge the line by holding hands
under spout until soap is discharged.
Dispenser can be actuated up to
ten times consectutively while
holding hands under the spout
immediately after refilling .
8.在皂液吐出之前，请将手保持放在
吐皂口下方。吐皂口会连续吐皂10
次，以排出补充皂液时皂液软管内
的空气。