4
ENGLISH
OPERATING INSTRUCTIONS
1) Fill the Bath with Water
Fill the tub to your preference�
NOTE: Be careful not to overfill the bath as the water level will rise when the bather enters the bath�
2) Turn the Air Massage On
Press the ON/OFF button to begin the Air Massage�
The massage begins on an intensity level that is 60% of the maximum
intensity�
3) Change Massage Intensity
•
Press and hold the Up Blower button to increase the blower speed�
Release at the desired speed�
•
Press and hold the Down Blower button to decrease the blower speed�
Release at the desired speed�
4) Change Massage Modes
Press the Mode button to change between the massage modes� The
modes cycle in the following way:
Normal > Oscillate > Pulse > Normal
NO TE: The controller is designed to shut the blower off after 20 minutes
of continuous running� To restart the blower, press the On/Off button�
MASSAGE MODES
Massage Mode 1: Oscillating Massage Mode :
Oscillating mode gradually cycles through the
intensity settings giving a wave-like, soothing
massage�
Massage Mode 2: Pulsating Massage Mode:
Pulsating mode cycles the jets from the minimum
intensity level to the maximum intensity level, giving a
powerful, penetrating massage�
To Activate: Press the LED button
•
Pressing the LED button and holding for one second will turn the
light off�
Changing the Chromotherapy Mode
• The first press will turn the light on the first mode, the second will turn
the light on the next mode, etc�
• Chromotherapy modes: White, Rainbow Cycle (Slow), Rainbow Cycle
(Fast), Turquoise, Blue, Magenta, Red, Orange, Yellow, Green,
Rainbow Cycle (Slow)�
Chromotherapy Light
