4
ENGLISH
OPERATING INSTRUCTIONS
1) Fill the Bath with Water
Fill the tub to your preference.
NOTE: Be careful not to overfill the bath as the water level will rise when the bather enters the bath.
2) Turn the Air Massage On
Press the ON/OFF button on the keypad to begin the Air Massage.
The intensity level is marked by a small “n” and a number on the display.
NOTE: The massive begins on intensity level 3 (“n-3”) or your previous
setting.
3) Change Massage Intensity
Press the +/- button to cycle through the massage intensities. The
Normal mode intensities cycle as follows:
n-3 > 4 > 5 > 4 > 3 > 2 > 1 > 2 > 3
4) Change Massage Modes
Press the Mode button to change between the massage modes. The
modes cycle in the following way:
Normal > Oscillate > Pulse > Normal
NO TE: The controller is designed to shut the blower off after 20 minutes
of continuous running. To restart the blower, press the On/Off button.
MASSAGE MODES
Massage Mode 1: Oscillating Massage Mode (OSC):
Oscillating mode gradually cycles through the
intensity settings giving a wave-like, soothing
massage.
Massage Mode 2: Pulsating Massage Mode (PUL):
Pulsating mode cycles the jets from intensity level
1 to intensity level 5, giving a powerful, penetrating
massage.
To Activate: Press the LED button
• Pressing the LED button again will turn the light off.
Changing the Chromotherapy Mode
• The first press will turn the light on, the second will turn it off, the
third within 2 seconds will start the light in the next mode, etc.
• Chromotherapy modes: Slow Spectrum, Fast Spectrum, Slow
Random Color, Fast Random Color, High Speed Random (color
flashes), Blue-Green Fade, Pure White, Pink, Lavender, Light Blue,
Dark Blue, Light Green, and Dark Green.
Chromotherapy Light (Optional)
