Toto Link ND300V2, Manual

Page: 8 / 57

8
connection between your PC and the Router. Open a command prompt, and type in ping
192.168.0.1 , then press Enter.
If the result displayed is similar to that shown in above figure, it means that the connection
between your PC and the Router has been established.
If the result displayed is similar to that shown in the above figure, it means that your PC has
not connected to the Router successfully. Please check it following below steps:
1. Is the connection between your PC and the Router correct?
If correct, the LAN port on the Router and LED on your PC’s adapter should be lit.
2. Is the TCP/IP configuration for your PC correct?
Since the Router’s IP address is 192.168.0.1, your PC’s IP address must be within the
range of 192.168.0.2 ~ 192.168.0.254, the Gateway must be 192.168.0.1.