LCD Display Operations
Setting Mode:
When the ebike is on, press and hold + and — buttons
at the same time for 3 seconds to enter the setting mode. Press once M
to confirm and enter the next set. Press + or — to adjust the number.
Press and hold + and — buttons at the same time for 3 seconds to quit
the Setting Mode.
P01
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
P12
P13
Backlight brightnes
Mileage unit
Voltage rating
Dormancy time for LCD
display automatic turn off
PAS level
Diameter
Speed measurement
magnetic steel number
Speed Limit
Zero start/non-zero start
settings
Drive mode set
Assistance sensitivity
setting
Power start strength set
Three types of magnetic
steel
Level 1is thedarkestand level 3 is the brightest
0for KM;1for MILE
24 V/36V/48V/60V/64V; default 48 V
0 for no dormancy; other numbers are dormancy
timewith range of 1-60 minutes;
0 for 3 levels mode; 1 for 5 levels mode; 2 for 9
levels mode; Default 3 pedal assist levels mode
Unit: inch; accuracy: 0.1——Limitedfunction
1-100——Limitedfunction
Range 0-100 km/h,100 forno speed limit——Limit-
edfunction
0 for zero start;1 for non-zero start; Without pedal-
ing or using a throttle, the ebikein zero startcan
drive itself; too risky, would not recommend
0: Pedal power drive (through the power gear to
determine how much power output, this time the
throttle is invalid).1: Electric drive (through the
handle drive, this time pedaling is invalid).2: Auxil-
iary drive and electric drive coexist simultaneously
Range:1-24——Limitedfunction
Range :0-5——Limitedfunction
5,8 and 12 grains——Limitedfunction
Yes
Yes
No
Yes
No
No
No
No
Yes
Yes
No
No
No
14
Mode
Function
Description
Valid-
ness
