TM-P2LX User’s Manual
E. Other Jumper Settings
Speaker:
Connect to the system’s speaker for beeping.
Keylock:
Keyboard lock switch and Power LED connector.
Reset:
Short to restart system.
HDD LED:
LED ON when on board PCI IDE hard disk activates.
POWER SW (FOR ATX POWER SUPPLY):
The button should be a momentary switch that is normally open.
Pushing the ATX Power Switch will immediately change the system
status. Before or during “POST”, you need to hold the button for four
seconds in order to turn off the system.
J19: Clear CMOS
7
