TM-P2LX User’s Manual
D. EDO/ SDRAM Installation Procedures:
A 168-pin DIMM can support up to 384MB 3.3V EDO/ SDRAM.
Default setting: 3.3V. (Only)
To avoid compatibility and reliability problems, you are recommended to
test the 168-pin SDRAMs before buying them since the PCB
specifications differ.
First, verify the working voltage of the EDO/ SDRAM module in either
DIMM socket.
P2LX only supports 3.3V EDO/ SDRAM module. The following
illustration shows you the difference between 3.3V and 5V to ensure
your correct selection of 3.3V DIMM module for using.
You can set up the BIOS “Chipset Feature Setup” to the best working
condition basing on the type of EDO/ SDRAM you are using.
The BIOS DRAM default setting is 60 ns. Change the BIOS “Chipset
Feature Setup” default setting to 50ns for better performance, if the
chipset is marked 50ns.
5
