Totem LYNX, User Manual And Maintenance Instructions

Page: 7 / 20

3 | First Use Quick Guide
! Before using the kickscooter, read this manual and the
instructions available in the APP for a safe driving.
1| Install the APP
LYNX by TOTEM
2| Power on the
kickscooter
3| Follow the APP instructions to activate the kickscooter. When the connection is successful, the
Bluetooth icon will flash and then it will remain steady on the kickscooter display.
4| Follow the APP instructions to learn to drive safely.
5| Under the kickscooter, fixed to the
frame and on the top of the packaging,
there is the QR code associated to this
kickscooter.
6| Wear an approved helmet and other protective
gear to minimize any possible injury. You can buy LYNX
helmet on the website:
www.totemev.com/en /
7| Check the power level indicator . Charge
the battery if the level is low.
8| Stand on the deck with one foot
and push off with another foot to
start riding.
9| Put your other foot on the deck to keep
both feet stable. Press the throttle on the
right hand to speed up when you are
balanced.
Note, for your safety, the motor will not
engage until the Kickscooter reaches
1.86 mph (3 km/h).
To slow down, release the throttle and gently
press the brake lever, taking care to shift your
weight backwards to maintain greater stability.
10| To turn, shift your body weight and
turn the handle slightly. When needed, operate the
direction indicators using the switch located on the left
side of the handlebar. Put the switch back in the middle
position to turn them off.
09 10
11| Enjoy your ride with LYNX!