4.4 Handlebar
On the handlebar there are the following devices:
•
Brake lever;
•
Kickscooter operation indicator display (battery level, riding mode, light on / off, speed).
•
On / off button with multiple functions:
•
Press and hold for about 1s to turn on the kickscooter, hold for about 1s to turn off the
kickscooter. When the kickscooter is switched on, the display will light up to indicate the
operating status, while for switching off and charging it must be placed in the OFF position,
indicated by the dark display.
•
It is recommended to remember swith off the kickscooter when it is not used to avoid
draining the battery.
❑
Press once briefly to change the driving mode.
❑
Press twice briefly to turn the headlight on or off.
❑
Press three times briefly to change the speedometer signal from km / h to Mph and vice
versa.
•
Accelerator lever
❑
Press down to accelerate, release to slow down, the throttle is proportional.
•
Selector for turn indicators
❑
Move the selector in the direction you intend to turn, then return the selector to the
central position after making the turn.
•
Bell to warn passers-by of your arrival.
4.5 Folding the Kickscooter
The scooter can be folded to reduce its bulk during transport. The procedure for folding the
handlebar is shown in the following images.
1.
After powering off the kickscooter, push the locking device upwards;
2.
Pull the release lever forward;
3.
To lock the front pipe in the folded position, align the locking device on the handlebar with
the one on the rear fender and engage them.
Bell
Front brake lever
Display
Knob
Turn indicators selector
On/Off button
Smartphone holder
Throttle lever
15
16
Position of the front pipe
The front pipe must always be locked in one of the two positions provided, firmly and
safely. Always check that the front pipe is well fixed before setting off.
An accidental folding of the front pipe while driving could cause very serious accidents.
DANGER
