User’s Guide | TOTEM 10 - TOTEM 20
27 of 30
5.
Remote Control
A.
Local Area Network Connection
It is possible to connect a portable device to the Control Switchoard. Connection can
be set up via the lan port located on the control switchboard or through a wi-fi
network.
It is possible to connect a laptop or a tablet to access the Operator’s panel
screenshot using a browser.
To enable access, a static IP address must be set on the device to be connected.
The IP to be used for device connection is: 192.168.5.x (where x is any number
other than 1).
Once the static IP address has been set, open your browser (Internet Explorer,
Mozilla, Chrome or others) and enter the following address
http://192.168.5.1:8080
The login page will be shown on screen. Enter your username and password.
This will give you access to the User’s screenshot.
The list of parameters that can be viewed thorugh the Operator’s panel (or
smartphone) or via connection with a laptop/tablet is provided hereunder.
Operators Panel or Smartphone
Max water temperature at outlet engine stop
Min water temperature at outlet engine restart
External circuit water circulator pump stop delay
Electric power produced in kW - 2 decimals
Electric power produced
Magneti Marelli diagnostic code
Water temperature at TOTEM inlet
Water temperature at TOTEM outlet
Temperature inside the unit
Grid connected working hours
Maintenance interval down-counter
Machine Status and Step
Laptop – Tablet
Max water temperature at outlet engine stop
Min water temperature at outlet engine restart
External circuit water circulator pump stop delay
Electric power generated as kW - 2 decimals
Electric power generated
Electric Power generated on L1 phase line
