PREPARATION
Before beginning operation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 5 minutes
•
No tools required for assembly.
OPERATION INSTRUCTIONS
1. Connect tubing to the outlet of the pump with the adapter.
Fig. 1
NOTE: Tubing is NOT INCLUDED.
Fig. 1
2. Place the pump into the water and connect to a proper power
source. Fig. 2
Fig. 2
3. Adjust the flow control to the preferred setting. Fig. 3
Fig. 3
CARE AND MAINTENANCE
•
Regular cleaning of the pump may be necessary depending upon the environment in which it is
operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
•
Before cleaning, always disconnect the pump from the power source.
•
Remove all parts from the pump and clean in warm, soapy water.
•
Disassemble the front cover and remove the impeller cover to expose the impeller assembly.
Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush
to clean the impeller assembly and the inside of the impeller housing.
Tubing
GFCI
Adapter
Pump
2
