TotalPond 52213, Manual

Page: 6 / 20

VISIT WWW
.TOT
ALPOND.COM FOR INFORMA
TION AND TIPS.
EN
6
PREPARATION
Before beginning assembly or operation of product, make
sure all parts are present. Compare parts with package
contents list and diagram. If any part is missing or damaged,
do not attempt to assemble, install or operate the product.
Contact Customer Care for replacement parts.
• Estimated assembly time: 5 minutes.
• No tools required for assembly.
OPERATION INSTRUCTIONS
This kit includes a coupler and a diverter valve. To flow water
to the fountain nozzle only, go to Step 1A . To flow water to the
fountain nozzle and a spitter, go to Step 1B.
Step 1A . Connect the two
extension tubes with the
coupler.
If no spitter is to be used,
proceed to Step 3.
Step 1B . Connect the
extension tubes to the
diverter valve. Make sure
the arrow is pointing up
and the diverter valve is
connected as shown.
Step 2 . For the use of the
diverter valve, connect
1/2 in. ID tubing onto the
second output of the
diverter valve. Connect
the other end of tubing to
a spitter or other water
feature.
NOTE: Tubing and spitter
are not included.
1A 1B
2