19
Kurzschluss-Schutzfunktion:
Wird ein Kurzschluss beim Drücken des
Power-Tasters erkannt, blinkt die LED
5-Mal auf. Wechseln Sie in diesem Fall den
Verdampferkopf.
Niederspannungsschutz:
Fällt die Akku-Spannung auf unter 3,3 Volt,
blinkt die LED 40-mal auf und das Gerät
schaltet sich ab – Ladevorgang erforderlich.
Widerstandsanzeige:
Wenn ein Verdampferkopf mit einem
Widerstand höher als 5 Ohm von der
Tornado NX erkannt wird, blinkt die LED
langsam auf. Sollte ein Verdampferkopf
mit einem Widerstand niedriger als 0.2
Ohm erkannt werden, blinkt die LED 5-Mal
auf. Vergewissern Sie sich bei dieser
LED-Meldung, dass der Verdampferkopf
richtig eingesetzt wurde oder tauschen Sie
diesen bei erneuter Meldung durch einen
Neuen aus.
Bedienung Ihrer Tornado NX