6
7
Using your Tornado II Slim
Using your Tornado II Slim
Power on and off: Press the power button 5 times in
quick succession, the button light will flash 5 times to
indicate the Tornado II Slim is on and ready to use. In
the same way, to turn the Tornado II Slim off, press the
power button 5 times in quick succession.
Vaping: Press the button as you inhale. When
the button is held down, the button light will be
illuminated.
To fill the tank: Invert
the Tornado II Slim and
unscrew the battery and
atomizer base from the
tank. Fill the tank through
the gap around the
central tube.
Charging the battery: Simply charge the Tornado
II Slim battery via the USB cable connected to a
powered USB port or suitable wall adapter. When it is
fully charged the red LED light will go out.
Battery status indication: When the power button
is pressed the LED beside the switch button will
indicate the remaining battery life. The light will remain
steadily on for 5 seconds if the remaining battery life is
greater than 60%; below this the light will pulsate at an
increasing speed as the battery life is drained. When
the battery reaches below 10% charge remaining, the
light will pulsate rapidly.
Low battery warning: When the battery is completely
drained, the button light will flash 40 times, and the
device will shut down automatically. Use may be
resumed after connecting to a USB charger.
